0.2mm Mesh Stainless Steel Strainer Replacement Screen 36x50mm

Replacement screen in stainless steel 1.4301 (304) with 0.2 mm mesh width. Size Ø 36 x 50 mm (diameter x length). Fits the G 1 1/4 SLB Y-strainers SLB-F-114 and SLB-114. The screen retains particles larger than 0.2 mm. This is the fine-mesh screen. A finer mesh blocks sooner, so clean the screen more often. For coarser particles and a lower pressure drop, use the 0.5 mm standard screen V3MBP: it has the same size. Clean the screen at regular intervals to keep the pressure drop low. Replace a screen with a torn or deformed mesh, because it lets particles through.

Pros:

• 0.2 mm mesh width, Ø 36 x 50 mm
• Fits SLB-F-114, SLB-114
• Stainless steel 1.4301 (304) screen
• Same size as the 0.5 mm screen, mesh width interchangeable

Cons:

• Fine mesh blocks sooner, needs more frequent cleaning
• Fits only G 1 1/4 SLB strainers, not SLS or SLSE

Series:

Stainless steel 1.4301 (304) replacement screens for the SLB brass Y-strainers, G 1/4 to G 4. Standard mesh width 0.5 mm (G 2 1/2 to G 4: 0.8 mm). Fine mesh width 0.2 mm, for G 1/4 to G 2 1/2. The standard screens up to G 2 also fit the SLBN nickel-plated brass strainers. One screen fits the G 1/4, G 3/8, and G 1/2 strainers. The standard and fine screens of one size have the same dimensions. To change the mesh width, change only the screen, not the strainer.