2" PTFE Strainer Seal Kit

Replacement PTFE seals for the G 2 SLS Y-strainers SLS-200 and SLS-F-200. Open the cover to clean or change the screen. At reassembly, replace the seals when the old seals no longer seal. The seals are silicone-free, for systems that must stay free of silicone. PTFE resists water, oil, fuels, solvents, and aggressive media, from -20 to 200 °C. Keep a seal kit with the spare screen, to close the strainer again at the first service. The replacement screen is a separate product: V3MAB (0.8 mm mesh) and V3MAH (0.25 mm fine mesh).

Pros:

• Silicone-free PTFE seals
• Fits SLS-200, SLS-F-200
• PTFE resists fuels, solvents, and aggressive media
• -20 to 200 °C

Cons:

• Fits only G 2 SLS strainers, not SLSE or SLB
• Seals only, the replacement screen is a separate product

Series:

Replacement screens and PTFE seal kits for the SLS stainless steel Y-strainers, G 1/4 to G 2. Screens in stainless steel 1.4401 (316) with 0.8 mm standard mesh or 0.25 mm fine mesh. The standard and fine screens of one size have the same dimensions. To change the mesh width, change only the screen, not the strainer. One screen and one seal kit fit the G 1/4, G 3/8, and G 1/2 strainers. The seal kits contain silicone-free PTFE seals.